Optima Compact Heater

  • Designed for In-ground, Above Ground & Splasher Pools      
  • Available in 3-kW ~ 24-kW                                   
  • Touch screen set-and-forget display                            
  • BMS Integration Ready                                       
  • Digital Control Thermostat & Water Temperature   
£0 GBP
Share:
  • Reliable
  • Exceeds all known Global standards for safety and reliability
  • BMS Integration Ready
  • Silent Operation
  • Stay-clean vortex inducing Titanium heating elements
  • Touch screen set-and- forget display
  • Priority of heating with hook-up to control
  • Dual cascade wired Schneider contactors
  • Floor or wall mountable
  • Time clock operation
  • No servicing required
  • 3-year warranty
  • 100% operational efficiency throughout product life
  • Alternative control thermostat options:
    - Standard Digital 0.5°C differential
    - Analogue 1.2°C differential 
 
The Elecro Optima Compact range is BMS integration ready and comes with corrosion-resistant titanium heating elements, making it highly robust and durable.
 
The Optima Compact is designed and manufactured to the highest specifications at the Elecro works in Hertfordshire, England. Compact in design, robust and ultra-reliable, this heater is made to last, providing you the perfect pool temperature with easy to use controls.
 
All Elecro electric heaters feature our unique and proven coiled heating element technology, whereby a turbulent vortex is created in the water flow. This delivers outstanding efficiency and extended life expectancy by preventing the build up of mineral deposits on the heating elements.
 
The Optima Compact range can be easily operated using the digital thermostat, accurate to 0.5°C and is ready for integration to your Building Management System. The heater’s outlet manifold accommodates a flow switch, with gold tipped reed, that provides a signal to the control board for ultimate reliability and safety; whilst the inlet manifold has been designed to eliminate the risk of air locking. Over-heating is prevented by a manual-reset thermal safety cut-out.

The heater can be vertically wall-mounted using the supplied bracket, or free-standing on the floor using the footed base.
 
Flow requirements Minimum Flow:
3-kW to 6-kW = 1m³/hour
9-kW to24-kW = 4m³/hour
Maximum Flow : 17m³/hour
Recommended: 10m³/hour
Heating Elements Titanium, low watts density
Flow Tubes Optima Compact = BS 316L Stainless Steel
Optima Compact PLUS = Titanium
Control Thermostat Options - BMS Integration Ready with touch screen control panel
- Standard Digital 0.5°C differential (without BMS integration or touch screen)
- Analogue 1.2°C differential
Safety Thermostat 55° C (manual reset)
Flow Switch Gold tipped reed switch with Titanium fulcrum pin
Contactors Duel Schneider Electric
Wiring High temperature, silicone sheathed, multi-strand copper conductors
Seals High temperature special formula EPDM
Water Connections 1½" BSP female thread supplied with:
1½" / 50mm ABS unions for rigid pipe
1½" / 1¼" hose tails for flexible pipe
Working Pressure 4 bar maximum
Mounting Floor or wall mountable (wall bracket supplied)
Standards compliance European Electromagnetic Compatibility directive
Harmonised standards The European Low Voltage Directive and The Harmonised Standard
Control thermostat suffix:
T = Touch screen digital with BMS integration
Z = Standard digital thermostat (without BMS integration)
A = Analogue

220~240V Single Phase
 Power
Output
Load (Amp) Optima Compact Optima Compact plus
3-kW 13 OC-1-3 OCP-1-3
6-kW 27 OC-1-6 OCP-1-6
9-kW 40 OC-1-9 OCP-1-9
 
Versatile Single / 3 Phase
Power
Output
Load (Amp)
Single / 3 Phase
Optima Compact Optima Compact plus
6-kW 27/9 OC-V-6 OCP-V-6
9-kW 40/13 OC-V-9 OCP-V-9
12-kW 53/18 OC-V-12 OCP-V-12
 
380V~440V 3 Phase
Power
Output
Load (Amp) Optima Compact Optima Compact plus
15-kW 22 OC-3-15 OCP-3-15
18-kW 26 OC-3-18 OCP-3-18
24-kW 35 OC-3-24 OCP-3-24