900 EVO Aquatic Heater

•  Digital control with 0.5°C differential 
•  Digital temperature display 
•  Anti-cycle protection 
•  Available in 2-kW > 8-kW 
•  Reversible Flow Switch 
•  Optional integrated 24-hour time clock 
£0 GBP
Share:
  • Robust, durable construction
  • Fully Equipped
  • Easy to install
  • Titanium heating elements
  • Titanium or BS 316L Stainless Steel flow tube
  • Ultra-reliable flow switch allows safe operation as low as 1m³/hour
  • May be floor or vertically wall mounted
  • Digital control thermostat 0-40°C (0.5°C differential)
  • Digital temperature display
  • Anti-cycle protection
  • Optional integrated 24-hour time clock
  • Safety thermal cut our 60°C (manual reset)
  • 1½" BSP female threaded water connections

 


 

The Elecro 900 EVO Aquatic heater is manufactured from top quality components and material at the Elecro works in Hertfordshire, England.
Construction consists of a flow tube which is fitted with inlet and outlet mouldings manufactured from specially formulated polymer alloy material. The outlet moulding accommodates a reversible flow switch (allowing water input from wither direction) with a gold tipped reed switch and Titanium fulcrum pin. The inlet moulding has been designed to ensure full immersion of the elements, greatly reducing the risks of air locking.
 

The heater is supported on two swivel feet; these can be rotated to permit either wall or floor mounting. The heater control components are positioned on the front face of the electrical enclosure.
 

The desired water temperature can be easily selected on the 900 EVO Aquatic heater using the programmable digital thermostat. The single or three-phase power is supplied through a top quality Schneider contactor. Safety and equipment protection is provided by the highly reliable flow switch and over-temperature protection is provided by the thermal cut out (manual reset).

 

Minimum Flow Requirement 1m³ (1,000-litres) per hour
Maximum Flow Velocity 17m³ (17,000-litres) per hour
Heating Elements Titanium
Flow Tube BS 316L Stainless Steel or Titanium
Digital Control Thermostat 0ºC > 40ºC (0.5ºC Differential)
Safety Thermal 
cut-out
55ºC (Manual reset)
Flow Switch Gold tipped reed switch with Titanium fulcrum pin
Wiring High temperature, silicone sheathed, multi-strand copper conductors
Contactor Schneider Electric 
Seals High temperature special formula polymer
Working Pressure 4 bar maximum
Water Connections 1½" BSP female thread
Supplied ABS Unions For 1½" / 50-mm rigid pipe
Supplied Hosetails For 1½" / 1¼" flexible pipe
Mounting Floor or wall mountable
900 EVO 230V Models & Product Codes
Power Output Load (Amp) S/S Flow Tube With Titanium Elements S/S Flow Tube With Titanium Elements + 24-Hour Time Clock Titanium Flow Tube With Titanium Elements Titanium Flow Tube With Titanium Elements + 24-Hour Time Clock Dimension 'L' Wiring Diagram
2-kW 9 9T2 97T2 T02 T12 462-mm View
3-kW 13 9T3 97T3 T03 T13 462-mm View
4-kW 18 9T4 97T4 T04 T14 462-mm View
6-kW 27 9T6 97T6 T06 T16 462-mm View
8-kW 35 9T8 97T8 T08 T18 592-mm View

900 EVO 400V 3 Phase Models & Product Codes
Power Output Load (Amp) S/S Flow Tube With Titanium Elements S/S Flow Tube With Titanium Elements + 24-Hour Time Clock Titanium Flow Tube With Titanium Elements Titanium Flow Tube With Titanium Elements + 24-Hour Time Clock Dimension 'L' Wiring Diagram
6-kW 9 93T6 92T6 TA36 TA76 592-mm View
8.4-kW 13 93T8 92T8 TA38 TA78 592-mm View